Assessment Validation: A Beginner's Guide to Validating Assessments

Assessment Validation: A Beginner's Guide to Validating Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Although our articles cover validation extensively, let’s redefine it. According to ASQA, validation is a quality review of the assessment process.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

We must adhere to the standards by conducting two types of validation.

The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

The Basics of the Two Types of Assessment Validation

Breaking Down Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or verification, also known as assessment tool validation, relates to the first part of the clause, ensuring all unit requirements are met and workbooks are 100% compliant.

Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

Steps to Perform Assessment Tool Validation

Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.

When to Conduct Assessment Tool Validation

The aim of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated
- when new training products are added on scope
- course is reviewed by you against training product updates
- identify your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based regulatory approach means RTOs should conduct regular risk assessments. Complaints from students about learning resources are a prime opportunity for assessment tool validation.

Selecting Training Products for Validation

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Resources Needed to Start Assessment Tool Validation

Academic Resources

To validate assessment tools, you need the complete suite of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – during validation, check if it's suitable as an assessment tool. Ensure instructions are clear and answer fields are sufficient. This is a common gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates developed independently from the workbook and marking guide. Validate them to confirm they suit the assessment task and address unit requirements.

Team for Validation

Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.

Overall, your validation panel should have:

Relevant vocational competencies and industry skills applicable to the unit being validated

Current knowledge and skills related to vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an equivalent successor

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before website letting the students use them.
It can also serve as proof that you have validated your resources before allowing students to use them.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Principles of Assessment Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates of this kind simplify validation, they can introduce judgment errors due to a lack of space for comments on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?

Key Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?

Despite being frequently covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:

Walk the Talk

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

nappying

bottle preparation, feeding babies from bottles, and cleaning equipment

solid foods preparation and feeding babies

appropriately respond to baby signs and cues

prepare infants for sleep and soothe them

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Pay Attention to Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

All or Nothing

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Be More Specific?

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What can be included in a work package?

Answers can include:

Obligatory resources

Associated costs

Activity timeframe

Assigned functions and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolating, engineering

People – isolating, use of engineering controls, administrative controls

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering, administration

Equipment or machinery – isolating, engineering, administration

Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.